Bending is a process in which sheet metal is bent and formed under the action of upper and lower dies. After one stroke of the slider, the sheet metal is bent into a cross-sectional profile of a certain geometric shape, and a workpiece of various shapes can be folded out with a relatively simple mold, and various complex cross-sectional shapes can be obtained by multiple bending. If equipped with a suitable mold, it can also be used for punching, shallow drawing, etc. After adding the numerical control function, the machining accuracy and production efficiency are effectively improved.

Bending Effect

Main Configuration

*CNC system Switzerland CYBELEC

*Hydraulic system Germany HAVE

*High-speed ball screw and linear guide Taiwan HIWIN

*AC servo motor and servo motor drives Japan SANYO DENKI

*Grating Turkey OPKON

*Tubing, Joints Italy RASTELLI

Characteristic

*Full welded steel frame, stress relieved by vibration process to prevent body deformation

*The parallelism of the ram (Y1, Y2) achieved with the use of advanced proportional valve control and the signal feedback by the linear scales.

*Synchronization of Y1 and Y2 axis within 0.01mm, the bending angle is 0.5.

*Adjustable speed change over point and the upper limited stop point is depend on the feedback of the Linear scales.

CNC System CYBELEC